TH-100-EN54

TH-100-EN54

  • High sound pressure level
  • Weather-proof
  • Stainless steel mounting V4A (AISI 316)
TH-100-EN54
TH-100-EN54
TH-100-EN54

Weather-proof horn speaker for voice alarm applications, certified according to EN54-24, suitable for industrial indoor and outdoor use with high sound pressure level.

The boundary horn speaker TH-100-EN54 has been developed for areas with extreme high ambient noise and is suitable for indoor and outdoor application, such as tunnels. It is built to withstand corrosive atmospheric contaminants, high moisture levels and temperature extremes. The horn provides an enormous sound pressure level, a very balanced frequency response and also a very low distortion.

The TH-100-EN54 with a flame retardend plastic housing (UL 94 V-0) in RAL 7023 (concrete grey) and IP 65 protection is also equipped with a ceramic block and thermal fuse. The high quality 100W horn driver offers a high performance CCAR voice coil. Furthermore sturdy cable glands 2 x PG13,5 are also provided.

Sturdy installation by rust-free V4A stainless steel brackets and screws (1.4401 according to ISO 3506 / EN 10088-3; AISI 316).

Two mounting options are available: TH-100-WH offers 4 single mounting brackets and the premium mounting kit TH-100-PH enables the installation by only one person.

This horn speaker provides intelligible voice notifications over great distance, resulting in a lower number of loudspeakers which are required. The product is a certified voice alarm speaker according EN54-24 and there is no additional equalizer needed to meet the frequency response requirements according EN54-24.

Artikel Nr.20153015
ProduktTH-100-EN54
Power 100/50/25W
Impedance (100V) 100/200/400 ohm
Information Frequency Range 280 - 9.000 Hz
Information Frequency Response 250 - 10.000 Hz
Information SPL 1W/1m, peak 119,0 dB
Information SPL , 1W/4m, peak 107,0 dB
Information SPL Pmax/4m, peak 127,0 dB
SPL, rated noise power / 4m 119,0 dB
Information Sensitivity EN54-24, 1W/4m 101,9 dB
Information Sensitivity EN54-24, 1W/1m 113,9 dB
Dispersion -6dB, 500Hz h=58° v=35°
Dispersion -6dB, 1KHz h=35° v=25°
Dispersion -6dB, 2KHz h=40° v=20°
Dispersion -6dB, 4KHz h=54° v=15°
Connector 4-pin ceramic block
Maximum cable cross section 8mm²
Max. cable cross section loop 2x2mm²
Temperature range -25 / +70 C°
Dimensions 1228 x 832 x 413 mm
Type A/B B
IP Rating IP65
Weight (net) 16,0 kg
Colour black
Mounting V4A-mounting brackets (AISI 316)
Packing Unit 1
Ref. Nr. 01T-15
ID-Code SAA-TH01
Certificate Number 1438-CPR-0481
EN54 Horn Speaker measurements are done with the use of an equalizer.
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating as well as the temperature range specified are based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.
TH-100-EN54Technical Drawing
TH-100-EN54Technical Drawing
TH-100-EN54Sound Pressure Level Diagram
TH-100-EN54Polar Diagram
TH-100-EN54Polar Diagram

 

ic audio - to make people listen
© ic audio.com 2021