DL-SE 06-165/T-EN54

DL-SE 06-165/T-EN54

  • frameless design
  • suitable also for very thin ceilings
  • WAGO connector 221
DL-SE 06-165/T-EN54
DL-SE 06-165/T-EN54
DL-SE 06-165/T-EN54

Design ceiling speaker with metal firedome for voice alarm applications, certified EN 54-24, suitable for voice announcements and background music with excellent sound quality in buildings.

Inspired by the look of contemporary LED lights, the frameless design of the new 6W loudspeakers has all the makings of an instant classic. The 6W powered speaker is equipped with a 165mm full-range loudspeaker and a 100V transformer with 3 power adjustments. The powder coated metal in RAL 9016 guarantees long-term stability. For additional reliability the speaker is impregnated against wetness.

The speaker is also secured with protection class IP 21C against the security risks of environmental influences. Fast and easy installation by WAGO 221 connector and strong spring clamps with protective caps for vibration damping. Alternatively, the loudspeaker can also be mounted using a threaded rod. The connecting cables can be supplied by rubber grommets in the firedome.

Special paint of the speaker in 4-digit RAL- or NCS- colour available at extra cost.

The firedome is included in the delivery.

This speaker is suitable for a ceiling strength of about 1 – 45 mm. Our specification is primarily related to solid ceilings, for ceilings with soft materials a higher ceiling thicknesses could be necessary. In addition, stronger cables and other fittings may also result in changes of the appropriate setup. With regard to the variety of materials and manufacturers, we recommend to build in a sample of the speaker to match the requirements accurately.

Artikel Nr.20173197
ProduktDL-SE 06-165/T-EN54
Power 6/3/1,5 W
Impedance (100V) 1667/3333/6667 ohm
Information Frequency Range 63 - 16.000 Hz
Information Frequency Response 56 - 18.000 Hz
Information SPL 1W/1m, peak 97,0 dB
Information SPL , 1W/4m, peak 85,0 dB
Information SPL Pmax/4m, peak 92,0 dB
Information Sensitivity EN54-24, 1W/4m 80,0 dB
Information Sensitivity IEC 268-5, 1W/1m 92,0 dB
Dispersion -6dB, 500Hz 180°
Dispersion -6dB, 1KHz 180°
Dispersion -6dB, 2KHz 128°
Dispersion -6dB, 4KHz 94°
Connector WAGO 221 connector
Maximum cable cross section 4mm²
Max. cable cross section loop 4mm²
Temperature range -20 / +80 °C
Dimensions 220x104 mm
IP Rating IP21
Weight (net) 1,0 kg
Colour RAL 9016
Mounting Quick fit mounting
Packing Unit 8
Ref. Nr. tba
ID-Code tba
Ceiling Cut-out 194 - 202 mm
Certificate Number 1438-CPR-xxxx
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment. Therefore our warranty does not cover any damage caused by liquids.
Measurements according to DIN IEC 268-5 | RoHS compliant (2011/65/EU)
The IP rating as well as the temperature range specified are based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.
DL-SE 06-165/T-EN54Technical Drawing
DL-SE 06-165/T-EN54Sound Pressure Level Diagram
DL-SE 06-165/T-EN54Polar Diagram

RAL Colour

RAL Colour
ic audio - to make people listen
© ic audio.com 2018