DL-BR 30-165/T plus-EN54

DL-BR 30-165/T plus-EN54

  • bassreflex
  • quick mounting
  • impact-resistant ABS
DL-BR 30-165/T plus-EN54

2-Way-Ceiling speaker with firedome for voice alarm applications, certified EN 54-24, suitable for voice announcements and background music with excellent sound quality in buildings.

The 30W powered speaker is equipped with a 165mm 2-way bassreflex system with neodymium tweeter and a 100V transformer with 4 power adjustments. The speaker provides very high music quality. Low impedance operation is also possible. The impact-resistant ABS housing in RAL 9016 guarantees long-term stability. For additional reliability, a thermal fuse and a strain relief fitting are provided.

Protection class IP 21C secures the speaker against the impact of environmental influences. The speaker chassis is impregnated against wetness. Easy installation via screw mounting system.

Perfectly suitable for installations where high sound quality is required.

Artikel Nr.20142882
ProduktDL-BR 30-165/T plus-EN54
Power 30/15/7,5/3,75 (8) W
Impedance (100V) 333/667/1333/2667 ohm
Information Frequency Range 87 – 19.300 Hz
Information Frequency Response 100 – 19.200 Hz
Information SPL 1W/1m, peak 95,5 dB
Information SPL , 1W/4m, peak 83,5 dB
Information SPL Pmax/4m, peak 98,2 dB
Information Sensitivity EN54-24, 1W/4m 77,8 dB
Information Sensitivity IEC 268-5, 1W/1m 89,8 dB
Dispersion -6dB, 500Hz 180°
Dispersion -6dB, 1KHz 180°
Dispersion -6dB, 2KHz 115°
Dispersion -6dB, 4KHz 62°
Connector 4-pin screw terminal
Maximum cable cross section 4,9mm²
Max. cable cross section loop 2x4,9mm²
Temperature range -20 / +80 °C
Dimensions 239,5 x 141 mm
IP Rating IP21
Weight (net) 2,27 kg
Colour RAL 9016
Mounting Quick-mount clamps
Packing Unit 4
Ref. Nr. 006-14
ID-Code SAA-LS15
Ceiling Cut-out 210 mm
Certificate Number 1438-CPR-0435
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment. Therefore our warranty does not cover any damage caused by liquids.
Measurements according to DIN IEC 268-5 | RoHS compliant (2011/65/EU)
The IP rating as well as the temperature range specified are based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.
DL-BR 30-165/T plus-EN54Technical Drawing
DL-BR 30-165/T plus-EN54Sound Pressure Level Diagram
DL-BR 30-165/T plus-EN54Polar Diagram


ic audio - to make people listen
© ic audio.com 2019